Mortar Mix Calculator
Estimate the cement, sand and water for a batch of mortar from the volume you need and the mix ratio for the job. Pick a use, enter the mortar volume and press run. This is an approximate estimate for buying materials, not a quote; always follow the manufacturer's instructions and your local mix design. All processing runs locally in your browser. Your data is not uploaded to any server. 100% Local
How to Use the Mortar Mix Calculator
Choose your units and a mortar use (which sets the cement-to-sand ratio), enter the volume of mortar you need, and press Calculate mortar to see the cement, sand and water amounts.
What it accounts for
- A dry-volume factor of 1.33 converts wet mortar volume to dry ingredients.
- Cement is estimated at 1440 kg per cubic metre and sand at about 1600 kg per cubic metre.
- Water is estimated as about half the cement weight, a common starting point.
Choosing a mix
1:5 is a general bricklaying mix, 1:4 is stronger for load-bearing work and screeds, and 1:3 is a strong mix for repointing. The right ratio depends on the job, so confirm it with your supplier or a local mix design.
Features
- Cement in kilograms and 50 kg or 80 lb bags
- Sand by weight and by volume
- Water in litres and US gallons
- All processing runs locally in your browser. Your data is not uploaded to any server.
- Results are approximate estimates, not a quote; check the manufacturer's instructions and your local building requirements.
Sand moisture changes how much water you need, so start slightly dry and add water gradually until the mortar reaches the right consistency.