Drywall Calculator
Estimate how many drywall sheets a wall or ceiling job needs from the area and sheet size, and see the joint tape and screw quantities. Enter the area, the sheet width and height and a wastage allowance. This is an approximate estimate for buying materials, not a quote; check the sheet sizes available and the site requirements. All processing runs locally in your browser. Your data is not uploaded to any server. 100% Local
How to Use the Drywall Calculator
Choose your units, enter the area to cover and the sheet width and height, then a wastage allowance. Press Calculate drywall to see the sheets to buy, the joint tape length and the screw count.
What it accounts for
- Sheets are the area divided by the area of one sheet, rounded up with wastage.
- Joint tape is a rough allowance of about 1.2 m per square metre.
- Screws are a rough allowance of about 32 per square metre.
Getting a better number
Ceilings, many openings and awkward shapes waste more board, so raise the wastage allowance. Use longer sheets to reduce the number of joints where you can handle them.
Features
- Sheets to buy with a wastage allowance
- Joint tape length and screw count
- Metric and imperial units
- All processing runs locally in your browser. Your data is not uploaded to any server.
- Results are approximate estimates, not a quote; check the sheet sizes and your local requirements.
Store sheets flat and dry, and check the local fire and fixing requirements before you start.